Hardware Connection
1
Package Contents
Wall Socket
Wall Socket
Internet
Quick Installation Guide
150Mbps Wireless N Router
Cable/DSL Modem
TL-WR720N
Power Adapter
WPS/
RESET
POWER
WAN
1
2
4
Computer
5
2
3
Ethernet Cable
Resource CD
1
2
3
4
5
Power oꢀ your modem.
Connect the WAN port on your Router to the modem’s LAN port with an Ethernet cable.
Connect your computer to one of the LAN ports labeled 1~2 on the Router with an Ethernet cable.
150Mbps Wireless
N
Router
Power on the modem and wait for one minute .
Plug the provided Power Adapter into the POWER jack on the back of the Router and the other end to a standard electrical wall socket.
MODEL NO. TL-WR740N/TL-WR741ND
QIG
MODEL NO. TL-WR720N
Conꢀguration for Windows with Setup Wizard
If you are using a MAC/Linux or a Windows computer without a CD drive to run the mini CD, please refer to Appendix 1 for configuration.
2
Select your language from the drop-down menu. Click
Insert the TP-LINK Resource CD into the CD-ROM drive.
After the connectivity is checked successfully, please click
NEXT.
You can rename your wireless network on this page.
The default wireless name is TP-LINK_XXXXXX. Click
NEXT to continue.
1
3
5
7
START and the Easy Setup Assistant will guide you step
by step to set up the Router.
Select TL-WR720N and click Easy Setup Assistant.
2
Select the WAN connection type your ISP provides and click
NEXT. Here we take Dynamic IP for example.
After conꢁrming the hardware connection and the status
of LEDs, please click NEXT to continue.
You are recommended to select Most Security
(WPA2-PSK) to secure your wireless network.
4
6
8
The Router is
pre-encrypted.
The default wireless
password, the same
as the PIN code, is
printed on the label
at the bottom of the
Router.
(To be continued)
7106503893
Appendix 1: Conꢀguring the Router via Web Management Page
Conꢀguration for Windows with Setup Wizard (continued)
(for Mac OS X/Linux users or Windows users who can’t run the mini CD)
2
The Dynamic IP is the suitable connection type for most cases. Here we
4
After conꢀrming the conꢀgurations, click NEXT to continue.
Click FINISH to close the wizard.
1
11
9
take it as an example. On the next page, you can rename your wireless network
and create your own password on this page. The default wireless name is
TP-LINK_XXXXXX, and the default wireless password, the same as the PIN code, is
printed on the bottom label. Click Next to continue.
ꢀeld, then use the user name admin and password admin to log in.
Click Quick Setup in the main menu and click Next.
2
3
You can save these settings in a text file on your
desktop. If you forget the Network Security Key, you
can check the Router Settings.txt.
You can click WEB management interface for more
advanced settings.
After the conꢀguration is completed successfully, please
click NEXT.
The basic settings for your Router are completed. You
Internet connection.
10
12
Select the WAN connection type provided by your ISP.
Or you can select Auto-Detect and click Next to continue.
Click Reboot or Finish to make your settings take eꢁect.
5
Technical Support
For more troubleshooting help, go to
To download the latest Firmware, Driver, Utility and User Guide, go to
Appendix 2: Troubleshooting
4. How do I restore my Router’s conꢀguration
to its factory default settings?
2. What can I do if I cannot open the web manage-
ment window?
1) For Windows 7/Vista
1. What can I do if I cannot access the Internet?
For all other technical support, please contact us by using the following details:
Global
Australia & New Zealand
1) Check to verify all connections are connected properly.
Try with different Ethernet cables to ensure they are
working properly.
Tel: +86 755 26504400
Tel: AU 1300 87 5465
E-mail : [email protected]
If your router does not work properly, you can reset it and then
configure it again. With the Router powered on, press and hold
the WPS/RESET button on the rear panel for approximately 8
seconds before releasing it.
NZ 0800 87 5465
Service time: 24hrs, 7days a week
E-mail: [email protected]
Singapore
Service time: 24hrs, 7 days a week
Go to ‘Start > Settings > Control Panel’. Click ‘View
network status and tasks > View status > Properties’
and double-click ‘Internet Protocol Version 4
(TCP/IPv4)’. Select ‘Obtain an IP address automatically’,
choose ‘Obtain DNS server address automatically’and
click ‘OK’.
Tel: +65 62840493
Italy
E-mail: [email protected]
2) Check to see if you are able to access the Router’s web
management page. If not, please refer to “What can I
do if I cannot open the web management window?”.
Tel: +39 02 66987799
Service time: 24hrs, 7days a week
E-mail: [email protected]
Service time: 9:00 AM to 6:00 PM,
from Monday to Friday
UK
Tel: +44 (0) 845 147 0017
E-mail: [email protected]
Service time: 24hrs, 7days a week
Ukrainian
Tel: +380 (44) 590-51-14
E-mail: [email protected]
Service time: Monday to Friday
14:00 PM to 22:00 PM
3) Please log in the web management page
WAN”, and ensure that the WAN Connection Type is
Dynamic IP; this is the suitable connection type for most
DSL/Cable modems and other networks.
USA/Canada
Toll Free: +1 866 225 8139
E-mail: [email protected]
Service time: 24hrs,7days a week
2) For Windows XP/2000
Brazilian
Toll Free: 0800-770-4337
(Portuguese Service)
E-mail: [email protected]
Service time: Monday to Saturday
08:00 AM to 08:00 PM
Malaysia
Go to ‘Start > Control Panel’. Click ‘Network and
Internet Connections > Network Connections’.
Right-click ‘Local Area Connection’, select ‘Properties’
and then double-click ‘Internet Protocol (TCP/IP)’. Select
‘Obtain an IP address automatically’, choose ‘Obtain
DNS server address automatically’and click ‘OK’.
Tel: 1300 88 875465 (1300 88TPLINK)
E-mail: [email protected]
Service time: 24 hrs a day,
7days a week
4) For cable modem users, please click menu “Network >
Turkey
Indonesia
WPS/
WER
WAN
1
2
POW
MAC Clone”. Click Clone MAC Address button and
then click Save. Reboot the modem first and then the
Router, try to access the Internet from your computer. If
the problem persists, please go to the next step.
RESET
Tel: 444 19 25(Turkish Service)
E-mail: [email protected]
Service time: 9:00 AM to 6:00 PM,
7days a week
Tel: (+62) 021 6259 135
E-mail : [email protected]
Service time : Monday to Friday
9:00 -12:00; 13:00 -18:00
*Except public holidays
Switzerland
Poland
Tel: +48 (0) 801 080 618 / +48 22
7217563 (if calls from mobile phone)
E-mail: [email protected]
Service time: Monday to Friday 9:00 AM
to 5:00 PM. GMT+1 or GMT+2
(Daylight Saving Time)
Tel: +41 (0) 848 800998 (German Service)
E-mail: [email protected]
Fee: 4-8 Rp/min, depending on rate of
diꢁerent time
Service time: Monday to Friday 9:00 AM to
6:00 PM. GMT+ 1 or GMT+ 2
(Daylight Saving Time)
3. What can I do if I forget my password?
1) For default wireless password:
Please refer to the “Wireless Password/PIN” labeled
on the bottom of the Router.
Germany / Austria
Tel :+49 1805 875465 (German Service)
Russian Federation
+49 1805 TPLINK
2) For the web management page password:
Reset the Router ꢀrst and then use the default user
name and password: admin, admin.
E-mail: [email protected]
5) Connect your computer directly to your modem and
attempt to access the Internet. If you are still unable to
access the Internet, please contact your internet
provider for further assistance.
Tel: 8 (499) 754-55-60
Fee: 0.14 EUR/min from the German
ꢀxed phone network and up to 0.42
EUR/min from mobile phone
8 (800) 250-55-60
(toll-free call from any RF region)
E-mail: [email protected]
Service Time: Monday to Friday 9:00 AM
to 6:00 PM. GMT+1 or GMT+2
Service time: from 10:00 to 18:00
(Moscow time)
*Except weekends and holidays in
Russian Federation
(Daylight Saving Time in Germany)
* Except bank holidays in Hesse
TP-LINK TECHNOLOGIES CO., LTD.
|